SEAGATE TECHNOLOGY, INC. 1-800-SEAGATE http://www.seagate.com (C)opyright 1996 ST-19171FC Fibre Channel FC-AL, Dual Port (Barracuda 9) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ST-19171FC ÈÍÍÍÍÍÍÍÍÍÍͼ 40 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄ20/) BOTTOM Notes on 40 pin I/O connector: +12v = pins 2, 3, 4, 21 +5v = pins 19, 20, 40 GND = pins 6, 22, 23, 26, 29, 32, 35 Mating FC connector: AMP US p/n: 787317-1 straight-in, Male 40-pin ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-19171FC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ Reserved. Shipped with cover installed. Do not remove. Do not install jumpers ³ ÚÂÄÄÄÄ Reserved ³ ³³ÚÄÄÄ Fault LED ³ ³³³ÚÄÄ Port B Bypass LED ³ ³³³³ÚÄ Port A Bypass LED TOP (HDA) ÕØÍÍ͸ ³³³³1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ * BOTTOM ÔÍÍÍ;³³³ÀÅÙ ³ J6 ³³³ ÀÄÄ Ground LED ÄÙ ³³ÀÄÄÄÄ Active LED ³ÀÄÄÄÄÄ Ground ÀÄÄÄÄÄÄ Remote LED (pin-11 +5v) ST19171FC drives have two ports for connection to two independent loops. Both loops may be active, but only one of these ports may be receiving or originating data at any one time. Do not connect both ports to the same loop. ST-19171FC UNFORMATTED CAPACITY (MB) ________________11700 FORMATTED CAPACITY (MB) __________________9100 AVERAGE SECTORS PER TRACK ________________168 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________105,480 CYLINDERS ________________________________5,274 user HEADS ______PHYSICAL______________________20 DISCS (3.5 in) ___________________________11 MEDIA TYPE _______________________________THIN FILM/MR RECORDING METHOD _________________________PRML (0,4,4) ZBR INTERNAL TRANSFER RATE (mbits/sec)________80 to 124 EXTERNAL TRANSFER RATE (mbyte/sec) _______106.3 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER (/optional)________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________FC-AL Fibre Channel - Arbitrated Loop, ASA II BYTES PER TRACK __________________________ SECTORS PER DRIVE ________________________17,773,440 TPI (TRACKS PER INCH) ____________________5555 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) (read/write)__________9.7/10.7 Drive level with controller overhead SINGLE TRACK SEEK (ms) ___________________0.8/1.3 MAX FULL SEEK (ms) _______________________19.2/20.2 MTBF (power-on hours) ____________________1,000,000 SHOCK (G's, 11/2 ms): operating (Read/Write) __________2 abnormal ________________________10 nonoperating ____________________50/100 ACOUSTICS (Bels typical, sound power) ____ POWER DISSIPATION (watts/BTUs) Active ____18.3/62 Idle ______16.7/57 POWER REQUIREMENTS: +12V START-UP (amps) _2.2 +12V TYPICAL (amps) __0.8 idle +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.97 idle IDLE (watts) _________12.4 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 16 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (01/14/98)